==== UKM install log start ==== Thu Aug 31 10:02:08 UTC 2017 =============================== /etc/rc.d/rc.sysinit-internal proc_cmd_line=initrd=instrdf irqpoll sp_bdev= sp_ip=192.168.000.125 sp_ipm=255.255.255.0 sp_ipreq=y sp_ipg=192.168.000.254 sp_ipdns=8.8.8.8 sp_mnet=r8169 sp_mhdd=ahci sp_durl= BOOT_IMAGE=kernel /etc/rc.d/rc.sysinit-internal cmd_line= ================================= = rc.sysinit-internal started = Thu Aug 31 10:02:08 UTC 2017 ================================= MDEV_ENABLED=1 Mounting tmpfs on /dev Initializing /dev/mdev.seq Configuring /proc/sys/kernel/hotplug mdev initialization started mdev initialization completed mods_common="atkbd.ko xhci-hcd.ko" checking ... mods_common is set Changing current directory to /usr/local/bin Current directory is set to /usr/local/bin Checking for file mod-functions.sh ... found Loading modules from mods_common ================================= = mod-load.sh started = Thu Aug 31 10:02:08 UTC 2017 ================================= Checking for file mod-functions.sh ... found Executing depmod modules_to_load=atkbd.ko xhci-hcd.ko ---- mod_batch_load() begin Modules to load: "atkbd.ko xhci-hcd.ko" mod_load(): atkbd - module loaded mod_load(): xhci-hcd - module loaded ---- mod_batch_load() end ==== Loaded modules ==== Module Size Used by Not tainted xhci_hcd 67460 0 atkbd 13750 0 libps2 3952 1 atkbd i8042 11984 1 libps2 serio 8640 3 atkbd,i8042 ======================== ================================= = mod-load.sh finished = Thu Aug 31 10:02:09 UTC 2017 ================================= Changing current directory to / Current directory is set to / FILE_PARAMS_RUNTIME=/etc/ukm/params-runtime NETDEVICE= NETDEVICE is set to "eth0" Adding NETDEVICE variable to /etc/ukm/params-runtime sp_bdevfs= sp_bdevfs is set to "vfat" Adding sp_bdevfs variable to /etc/ukm/params-runtime Initializing lo net interface Adding lo interface to the route table sp_bdev= sp_bdevfs=vfat sp_mhdd=ahci sp_mnet=r8169 sp_mnetops= sp_ip=192.168.000.125 sp_ipm=255.255.255.0 sp_ipreq=y sp_ipg=192.168.000.254 sp_ipdns=8.8.8.8 sp_durl= sp_skip_floppy_detect= Checking sp_durl= sp_durl is empty Installati0n is OFFLINE == env before readcfg == ='' ADMIN_DB_PASSWORD='' ADMIN_DB_USER='root' AUTO='auto' AUTOSTART='y' BOOT_IMAGE='kernel' DB_PASSWORD='' DEFAULT_RELOADRD_URL='http://192.168.10.91/misc/ukminitrd' DIR_APACHE='/mnt/linux/usr/local/apache2' DIR_CLI_WEB='/mnt/linux/usr/local/apache2/htdocs/ukmcli' DIR_DB_INIT='db-init-data' DIR_DISTRIB='/mnt/bdev/ukminstall' DIR_DISTRIB_OFFLINE='/mnt/bdev/ukminstall' DIR_DISTRIB_ONLINE='/mnt/linux/tmp/ukminstall' DIR_INITRD_DISTRIB_SCRIPTS='/usr/local/bin' DIR_INSTALL_ROOT='/mnt/linux' DIR_LILLO='usr/local/lillo' DIR_PCSRV='usr/local/pcsrv' DIR_PEAR='/mnt/linux/usr/local/lib/php/pear' DIR_PHP='/mnt/linux/usr/local/lib/php' DIR_QT_LIBS='/usr/local/lib/qt' DIR_SMARTY='/mnt/linux/usr/local/lib/php/smarty' DIR_SRV_WEB='/mnt/linux/usr/local/apache2/htdocs/ukm' DIR_TMP_DOWNLOAD='/tmp/download' DIR_UKMCLI='usr/local/ukmclient' DIR_UKMINSTALL='ukminstall' DIR_UKMSRV='usr/local/ukmsrv' DISTRIB_COMMON_CLI='common-cli.tgz' DISTRIB_COMMON_UKM='common-ukm.tgz' DISTRIB_LILLO='lillo-fixed.tgz lillo-build.tgz' DISTRIB_LILLO_BUILD='lillo-build.tgz' DISTRIB_LILLO_FIXED='lillo-fixed.tgz' DISTRIB_LINUX='ukm-boot.tar.gz ukm-root.tar.gz ukm-kmods.tgz' DISTRIB_LINUX_BOOT='ukm-boot.tar.gz' DISTRIB_LINUX_KMODS='ukm-kmods.tgz' DISTRIB_LINUX_ROOT='ukm-root.tar.gz' DISTRIB_PCSRV='pcsrv-fixed.tar.gz pcsrv-build.gz' DISTRIB_PCSRV_BUILD='pcsrv-build.gz' DISTRIB_PCSRV_FIXED='pcsrv-fixed.tar.gz' DISTRIB_REPLACER='replacer-build.tgz' DISTRIB_REPLACER_BUILD='replacer-build.tgz' DISTRIB_SCRIPTS='scripts.tar.gz' DISTRIB_STAGE2='' DISTRIB_UKMCLI='ukmcli-fixed.tgz ukmcli-build.tgz' DISTRIB_UKMCLI_BUILD='ukmcli-build.tgz' DISTRIB_UKMCLI_FIXED='ukmcli-fixed.tgz' DISTRIB_UKMSRV='ukmsrv-fixed.tgz ukmsrv-build.tgz' DISTRIB_UKMSRV_BUILD='ukmsrv-build.tgz' DISTRIB_UKMSRV_FIXED='ukmsrv-fixed.tgz' DISTRIB_UKMUPMAN='ukmupman-fixed.tgz ukmupman-build.tgz' DISTRIB_UKMUPMAN_BUILD='ukmupman-build.tgz' DISTRIB_UKMUPMAN_FIXED='ukmupman-fixed.tgz' DISTRIB_XWIN='xwin.tgz' DRV_INIT_WAIT_SEC='1' EDITOR='vi' FILE_DEFAULT_I18N='/etc/ukm/i18n' FILE_INITRD_XWIN_CFG='/etc/ukm/XF86Config' FILE_INSTALL_CFG='/etc/ukm/install.cfg' FILE_INSTALL_LOG='/var/log/install.log' FILE_INSTMEDIA_KMODS='instmedia-kmods.tgz' FILE_INSTMEDIA_UTILS='instmedia-utils.tgz' FILE_LOGS_ARCHIVE='instlogs.tgz' FILE_MESSAGES_LOG='/var/log/messages' FILE_MKSPDEV_SH='mkspdev.sh' FILE_MOD_FUNCTIONS_SH='mod-functions.sh' FILE_PARAMS_RUNTIME='/etc/ukm/params-runtime' FILE_PATH_MKSPDEV_SH='/usr/local/bin/mkspdev.sh' FILE_RUNTIME_I18N='/mnt/linux/etc/sysconfig/i18n' FILE_SAVELOG_LOG='/var/log/savelog.log' FILE_SERIAL_CFG='/mnt/linux/etc/serial.cfg' FILE_SETUP_SCRIPTS='setup.tgz' FILE_UKMINST_RESULT='/etc/ukm/RESULT' HDD_PROBE_ORDER='sata idenew ide scsi' HISTSIZE='100' HOME='/root' IFS=' ' INSTALL_ROOT='/mnt/linux' IPADDRESS='192.168.000.125' IPADDRESS_DNS_SRV='8.8.8.8' IPADDRESS_GW='192.168.000.254' IPADDRESS_REQUEST='y' IPNETMASK='255.255.255.0' KERNEL_BOOT_PARAMS='' MAX_UDHCPC_ATTEMPTS='6' MDEV_ENABLED='1' MNT_POINT_INSTALL_MEDIA='/mnt/bdev' MNT_POINT_INSTALL_MEDIA_INSTROOT='/mnt/linux/mnt/bdev' MOD_NAME_PATA_SIS='pata_sis.ko' MOD_NAME_SATA_SIS='sata_sis.ko' MORE='-d' MYSQL_AFTER_START_DELAY_SEC='30' MYSQL_OPTIONS='--connect_timeout=60' NETDEVICE='eth0' OLDPWD='/usr/local/bin' ONLINE_INSTALL='n' OPTIND='1' PAGER='more' PARTITION_LABEL_BOOT='bootpart' PARTITION_LABEL_ROOT='rootpart' PARTITION_LABEL_SWAP='swappart' PATH='/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin' PPID='1303' PS1='# ' PS2='> ' PS4='+ ' PWD='/' REMOVE_DOWNLOADED_DISTRIBS='y' SAVE_LOG='y' SHELL='/bin/sh' SHLVL='1' TERM='linux' UKM_INSTALL_MEDIA_LABEL='UKMINSTMED' UKM_INSTALL_PARAMS='/etc/ukm/ukminst.rc' UNIX_ACCOUNT_LILLO='ukmclient' UNIX_ACCOUNT_UKMCLI='ukmclient' UNIX_ACCOUNT_UKMSRV='ukmserver' URL_DISTRIB_SRV='' USER='root' WGET_HTTP_ERROR_STRING_404='404 Not Found' WGET_HTTP_ERROR_STRING_416='416 Requested Range Not Satisfiable' WGET_MAX_ATTEMPTS='3' WGET_PAUSE_SEC='3' cmd_line='' currdir='/' initrd='instrdf' mods_common='atkbd.ko xhci-hcd.ko' needsysfiles='n' proc_cmd_line='initrd=instrdf irqpoll sp_bdev= sp_ip=192.168.000.125 sp_ipm=255.255.255.0 sp_ipreq=y sp_ipg=192.168.000.254 sp_ipdns=8.8.8.8 sp_mnet=r8169 sp_mhdd=ahci sp_durl= BOOT_IMAGE=kernel ' script='/etc/rc.d/rc.sysinit-internal' script_name='rc.sysinit-internal' sp_bdev='' sp_bdevfs='vfat' sp_durl='' sp_ip='192.168.000.125' sp_ipdns='8.8.8.8' sp_ipg='192.168.000.254' sp_ipm='255.255.255.0' sp_ipreq='y' sp_mhdd='ahci' sp_mnet='r8169' == env before readcfg == ================================= = setupsys.sh started = Thu Aug 31 10:02:09 UTC 2017 ================================= Changing current directory to /usr/local/bin Current directory is set to /usr/local/bin Checking for file mod-functions.sh ... found Checking sp_mods="" sp_mods is empty Checking sp_mods_pre_mhdd="" sp_mods_pre_mhdd is empty sp_mhdd=ahci sp_mhdd is set. Performing manual load mod_load(): ahci - module loaded mods_extra= No extra modules to load Changing current directory to / Current directory is set to / Waiting for devices to initialize ... Sleeping for 9 sec ... === Partitions ========= major minor #blocks name 8 0 1957888 sda 8 1 1957856 sda1 Disk /dev/sda: 2004 MB, 2004877312 bytes 255 heads, 63 sectors/track, 243 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x04570b3d Device Boot Start End Blocks Id System /dev/sda1 * 1 244 1957856+ e W95 FAT16 (LBA) Partition 1 has different physical/logical endings: phys=(242, 254, 63) logical=(243, 190, 11) /dev/sda1: LABEL="UKMINSTMED" UUID="2CC1-E319" TYPE="vfat" === Partitions ========= == Tuning hard disks started ============ Checking if fd0 is IDE/SCSI/SATA disk ... no Checking if fd1 is IDE/SCSI/SATA disk ... no Checking if loop0 is IDE/SCSI/SATA disk ... no Checking if loop1 is IDE/SCSI/SATA disk ... no Checking if loop2 is IDE/SCSI/SATA disk ... no Checking if loop3 is IDE/SCSI/SATA disk ... no Checking if loop4 is IDE/SCSI/SATA disk ... no Checking if loop5 is IDE/SCSI/SATA disk ... no Checking if loop6 is IDE/SCSI/SATA disk ... no Checking if loop7 is IDE/SCSI/SATA disk ... no Checking if ram0 is IDE/SCSI/SATA disk ... no Checking if ram1 is IDE/SCSI/SATA disk ... no Checking if ram10 is IDE/SCSI/SATA disk ... no Checking if ram11 is IDE/SCSI/SATA disk ... no Checking if ram12 is IDE/SCSI/SATA disk ... no Checking if ram13 is IDE/SCSI/SATA disk ... no Checking if ram14 is IDE/SCSI/SATA disk ... no Checking if ram15 is IDE/SCSI/SATA disk ... no Checking if ram2 is IDE/SCSI/SATA disk ... no Checking if ram3 is IDE/SCSI/SATA disk ... no Checking if ram4 is IDE/SCSI/SATA disk ... no Checking if ram5 is IDE/SCSI/SATA disk ... no Checking if ram6 is IDE/SCSI/SATA disk ... no Checking if ram7 is IDE/SCSI/SATA disk ... no Checking if ram8 is IDE/SCSI/SATA disk ... no Checking if ram9 is IDE/SCSI/SATA disk ... no Checking if sda is IDE/SCSI/SATA disk ... yes HDIO_SET_DMA failed: Invalid argument HDIO_GET_DMA failed: Invalid argument /dev/sda: setting using_dma to 1 (on) HDIO_SET_32BIT failed: Invalid argument HDIO_GET_32BIT failed: Invalid argument /dev/sda: setting 32-bit IO_support flag to 1 /dev/sda: readahead = 256 (on) HDIO_DRIVE_CMD(setreadahead) failed: Invalid exchange HDIO_DRIVE_CMD(identify) failed: Invalid exchange /dev/sda: setting drive read-lookahead to 1 (on) HDIO_GET_IDENTITY failed: Invalid argument /dev/sda: == Tuning hard disks completed ========== ================================= = setupsys.sh finished = Thu Aug 31 10:02:18 UTC 2017 ================================= ### Network setup begin ### Changing current directory to /usr/local/bin Current directory is set to /usr/local/bin =========================== ./mod-config.sh started =========================== Checking for file mod-functions.sh ... found modules_conf=/etc/modprobe.conf Checking if modules_conf variable is set Checking if /etc/modprobe.conf exists ... found Performing network module setup sp_mnet=r8169 sp_mnetops= Checking sp_mnet variable sp_mnet is set Performing module setup. Checking for "alias eth0 r8169" in /etc/modprobe.conf ... not found - adding =========================== ./mod-config.sh completed =========================== ================================= = mod-load.sh started = Thu Aug 31 10:02:18 UTC 2017 ================================= Checking for file mod-functions.sh ... found Executing depmod modules_to_load= r8169 ---- mod_batch_load() begin Modules to load: "r8169" mod_load(): r8169 - module loaded ---- mod_batch_load() end ==== Loaded modules ==== Module Size Used by Not tainted r8169 42927 0 mii 3427 1 r8169 ahci 19776 0 libahci 17636 1 ahci libata 129663 2 ahci,libahci xhci_hcd 67460 0 atkbd 13750 0 libps2 3952 1 atkbd i8042 11984 1 libps2 serio 8640 3 atkbd,i8042 ======================== ================================= = mod-load.sh finished = Thu Aug 31 10:02:19 UTC 2017 ================================= Changing current directory to / Current directory is set to / ================================= = setupnet.sh started = Thu Aug 31 10:02:19 UTC 2017 ================================= Checking NETDEVICE variable (NETDEVICE=eth0) Using static IP address 192.168.000.125 Activating eth0 Setting dafault gateway to 192.168.000.254 ================================= Network settings: eth0 Link encap:Ethernet HWaddr 4C:02:89:11:4F:11 inet addr:192.168.0.125 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.0.254 0.0.0.0 UG 0 0 0 eth0 127.0.0.0 * 255.0.0.0 U 0 0 0 lo 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 ================================= ================================= = setupnet.sh finished = Thu Aug 31 10:02:19 UTC 2017 ================================= ### Network setup end ### PXE mode is not used sp_bdev is not set. Performing install media detection. ==== install_media_detect() started sp_skip_floppy_detect= Checking floppy device file /dev/fd0 ... found Checking floppy label ... Checking another media labels -- /tmp/drives-labels.txt content ----- /dev/sda1: LABEL="UKMINSTMED" UUID="2CC1-E319" TYPE="vfat" -- /tmp/drives-labels.txt content ----- -- /proc/partitions content ----- major minor #blocks name 2 0 4 fd0 8 0 1957888 sda 8 1 1957856 sda1 -- /proc/partitions content ----- Searching for install media labeled "UKMINSTMED" ... found: /dev/sda1 ==== install_media_detect() finished sp_bdev="/dev/sda1" ================================= = readcfg.sh started = Thu Aug 31 10:02:19 UTC 2017 ================================= -- mount_install_media() begin mount_options=ro,codepage=866,iocharset=utf8 mount_point=/mnt/bdev sp_bdev=/dev/sda1 Checking if /dev/sda1 is mounted /dev/sda1 is not mounted Mounting /dev/sda1 (filesystem=vfat) on /mnt/bdev -- mount_install_media() end Checking file /mnt/bdev/install.cfg Copying /mnt/bdev/install.cfg -> /etc/ukm/install.cfg Converting /etc/ukm/install.cfg to unix format Adding sp_bdev= parameter to /etc/ukm/install.cfg Using separate directory for instmedia boot phase DIR_MODS_INSTMEDIA=/lib/modules/3.16.0nat/kernel/drivers/_instmedia_ create_dir() - Creating directory /lib/modules/3.16.0nat/kernel/drivers/_instmedia_ Adding DIR_MODS parameter to /etc/ukm/install.cfg Adding DIR_MODS_INSTMEDIA parameter to /etc/ukm/install.cfg -- /etc/ukm/install.cfg content ----- export UKMSERVER_PORT=10001 export INSTALL_LINUX=y export INSTALL_UKMCLI=y export INSTALL_XWIN=y export FILE_XWIN_CONFIG= export UKMCLI_DB_HOST=127.0.0.1 export UKMCLI_DB_PORT=3306 export UKMCLI_DB_NAME=ukmclient export UKMCLI_DB_USER=ukm_terminal export UKMCLI_DB_PASSWORD=CtHDbCGK.C export INSTALL_LILLO=n export INSTALL_UKMSRV=n export INSTALL_PCSRV=n export ADMIN_DB_USER=root export ADMIN_DB_PASSWORD= export IPADDRESS_UKMSRV=192.168.000.031 export sp_bdev=/dev/sda1 export DIR_MODS=/lib/modules/3.16.0nat/kernel/drivers export DIR_MODS_INSTMEDIA=/lib/modules/3.16.0nat/kernel/drivers/_instmedia_ -- /etc/ukm/install.cfg content ----- Searching modules in /mnt/bdev/modules find: /mnt/bdev/modules: No such file or directory =================== No modules found =================== Changing current directory to / Current directory is set to / Checking if file /mnt/bdev/setup.tgz exists ... not found Skipping it offline: Checking offline install dir /mnt/bdev/ukminstall ... FOUND offline: Checking offline install dir /mnt/bdev/db-init-data ... FOUND offline: Leaving install media mounted ================================= = readcfg.sh finished = Thu Aug 31 10:02:20 UTC 2017 ================================= Reloading params from the /etc/ukm/ukminst.rc == env after readcfg begin == ='' ADMIN_DB_PASSWORD='' ADMIN_DB_USER='root' AUTO='auto' AUTOSTART='y' BOOT_IMAGE='kernel' DB_PASSWORD='' DEFAULT_RELOADRD_URL='http://192.168.10.91/misc/ukminitrd' DIR_APACHE='/mnt/linux/usr/local/apache2' DIR_CLI_WEB='/mnt/linux/usr/local/apache2/htdocs/ukmcli' DIR_DB_INIT='db-init-data' DIR_DISTRIB='/mnt/bdev/ukminstall' DIR_DISTRIB_OFFLINE='/mnt/bdev/ukminstall' DIR_DISTRIB_ONLINE='/mnt/linux/tmp/ukminstall' DIR_INITRD_DISTRIB_SCRIPTS='/usr/local/bin' DIR_INSTALL_ROOT='/mnt/linux' DIR_LILLO='usr/local/lillo' DIR_MODS='/lib/modules/3.16.0nat/kernel/drivers' DIR_MODS_INSTMEDIA='/lib/modules/3.16.0nat/kernel/drivers/_instmedia_' DIR_PCSRV='usr/local/pcsrv' DIR_PEAR='/mnt/linux/usr/local/lib/php/pear' DIR_PHP='/mnt/linux/usr/local/lib/php' DIR_QT_LIBS='/usr/local/lib/qt' DIR_SMARTY='/mnt/linux/usr/local/lib/php/smarty' DIR_SRV_WEB='/mnt/linux/usr/local/apache2/htdocs/ukm' DIR_TMP_DOWNLOAD='/tmp/download' DIR_UKMCLI='usr/local/ukmclient' DIR_UKMINSTALL='ukminstall' DIR_UKMSRV='usr/local/ukmsrv' DISTRIB_COMMON_CLI='common-cli.tgz' DISTRIB_COMMON_UKM='common-ukm.tgz' DISTRIB_LILLO='lillo-fixed.tgz lillo-build.tgz' DISTRIB_LILLO_BUILD='lillo-build.tgz' DISTRIB_LILLO_FIXED='lillo-fixed.tgz' DISTRIB_LINUX='ukm-boot.tar.gz ukm-root.tar.gz ukm-kmods.tgz' DISTRIB_LINUX_BOOT='ukm-boot.tar.gz' DISTRIB_LINUX_KMODS='ukm-kmods.tgz' DISTRIB_LINUX_ROOT='ukm-root.tar.gz' DISTRIB_PCSRV='pcsrv-fixed.tar.gz pcsrv-build.gz' DISTRIB_PCSRV_BUILD='pcsrv-build.gz' DISTRIB_PCSRV_FIXED='pcsrv-fixed.tar.gz' DISTRIB_REPLACER='replacer-build.tgz' DISTRIB_REPLACER_BUILD='replacer-build.tgz' DISTRIB_SCRIPTS='scripts.tar.gz' DISTRIB_STAGE2='' DISTRIB_UKMCLI='ukmcli-fixed.tgz ukmcli-build.tgz' DISTRIB_UKMCLI_BUILD='ukmcli-build.tgz' DISTRIB_UKMCLI_FIXED='ukmcli-fixed.tgz' DISTRIB_UKMSRV='ukmsrv-fixed.tgz ukmsrv-build.tgz' DISTRIB_UKMSRV_BUILD='ukmsrv-build.tgz' DISTRIB_UKMSRV_FIXED='ukmsrv-fixed.tgz' DISTRIB_UKMUPMAN='ukmupman-fixed.tgz ukmupman-build.tgz' DISTRIB_UKMUPMAN_BUILD='ukmupman-build.tgz' DISTRIB_UKMUPMAN_FIXED='ukmupman-fixed.tgz' DISTRIB_XWIN='xwin.tgz' DRV_INIT_WAIT_SEC='1' EDITOR='vi' FILE_DEFAULT_I18N='/etc/ukm/i18n' FILE_INITRD_XWIN_CFG='/etc/ukm/XF86Config' FILE_INSTALL_CFG='/etc/ukm/install.cfg' FILE_INSTALL_LOG='/var/log/install.log' FILE_INSTMEDIA_KMODS='instmedia-kmods.tgz' FILE_INSTMEDIA_UTILS='instmedia-utils.tgz' FILE_LOGS_ARCHIVE='instlogs.tgz' FILE_MESSAGES_LOG='/var/log/messages' FILE_MKSPDEV_SH='mkspdev.sh' FILE_MOD_FUNCTIONS_SH='mod-functions.sh' FILE_PARAMS_RUNTIME='/etc/ukm/params-runtime' FILE_PATH_MKSPDEV_SH='/usr/local/bin/mkspdev.sh' FILE_RUNTIME_I18N='/mnt/linux/etc/sysconfig/i18n' FILE_SAVELOG_LOG='/var/log/savelog.log' FILE_SERIAL_CFG='/mnt/linux/etc/serial.cfg' FILE_SETUP_SCRIPTS='setup.tgz' FILE_UKMINST_RESULT='/etc/ukm/RESULT' FILE_XWIN_CONFIG='' HDD_PROBE_ORDER='sata idenew ide scsi' HISTSIZE='100' HOME='/root' IFS=' ' INSTALL_LILLO='n' INSTALL_LINUX='y' INSTALL_PCSRV='n' INSTALL_ROOT='/mnt/linux' INSTALL_UKMCLI='y' INSTALL_UKMSRV='n' INSTALL_XWIN='y' IPADDRESS='192.168.000.125' IPADDRESS_DNS_SRV='8.8.8.8' IPADDRESS_GW='192.168.000.254' IPADDRESS_REQUEST='y' IPADDRESS_UKMSRV='192.168.000.031' IPNETMASK='255.255.255.0' KERNEL_BOOT_PARAMS='' MAX_UDHCPC_ATTEMPTS='6' MDEV_ENABLED='1' MNT_POINT_INSTALL_MEDIA='/mnt/bdev' MNT_POINT_INSTALL_MEDIA_INSTROOT='/mnt/linux/mnt/bdev' MOD_NAME_PATA_SIS='pata_sis.ko' MOD_NAME_SATA_SIS='sata_sis.ko' MORE='-d' MYSQL_AFTER_START_DELAY_SEC='30' MYSQL_OPTIONS='--connect_timeout=60' NETDEVICE='eth0' OLDPWD='/usr/local/bin' ONLINE_INSTALL='n' OPTIND='1' PAGER='more' PARTITION_LABEL_BOOT='bootpart' PARTITION_LABEL_ROOT='rootpart' PARTITION_LABEL_SWAP='swappart' PATH='/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin' PPID='1303' PS1='# ' PS2='> ' PS4='+ ' PWD='/' REMOVE_DOWNLOADED_DISTRIBS='y' SAVE_LOG='y' SHELL='/bin/sh' SHLVL='1' TERM='linux' UKMCLI_DB_HOST='127.0.0.1' UKMCLI_DB_NAME='ukmclient' UKMCLI_DB_PASSWORD='CtHDbCGK.C' UKMCLI_DB_PORT='3306' UKMCLI_DB_USER='ukm_terminal' UKMSERVER_PORT='10001' UKM_INSTALL_MEDIA_LABEL='UKMINSTMED' UKM_INSTALL_PARAMS='/etc/ukm/ukminst.rc' UNIX_ACCOUNT_LILLO='ukmclient' UNIX_ACCOUNT_UKMCLI='ukmclient' UNIX_ACCOUNT_UKMSRV='ukmserver' URL_DISTRIB_SRV='' USER='root' WGET_HTTP_ERROR_STRING_404='404 Not Found' WGET_HTTP_ERROR_STRING_416='416 Requested Range Not Satisfiable' WGET_MAX_ATTEMPTS='3' WGET_PAUSE_SEC='3' cmd_line='' currdir='/' detected_bdev='/dev/sda1' initrd='instrdf' mods_common='atkbd.ko xhci-hcd.ko' needsysfiles='n' proc_cmd_line='initrd=instrdf irqpoll sp_bdev= sp_ip=192.168.000.125 sp_ipm=255.255.255.0 sp_ipreq=y sp_ipg=192.168.000.254 sp_ipdns=8.8.8.8 sp_mnet=r8169 sp_mhdd=ahci sp_durl= BOOT_IMAGE=kernel ' script='/etc/rc.d/rc.sysinit-internal' script_name='rc.sysinit-internal' sp_bdev='/dev/sda1' sp_bdevfs='vfat' sp_durl='' sp_ip='192.168.000.125' sp_ipdns='8.8.8.8' sp_ipg='192.168.000.254' sp_ipm='255.255.255.0' sp_ipreq='y' sp_mhdd='ahci' sp_mnet='r8169' == env after readcfg end ==== Checking AUTOSTART ... enabled SKIP_INSTALL_CONFIRM= SKIP_INSTALL_CONFIRM is NOT SET Executing confirm_install ... ==== confirm_offline_install() begin ======================================== ATTENTION! UKM4 installation is ready to start. The HDD will be formatted. All files at the HDD will be erased. To start installation press any digit [0]-[9] or [Enter] key To stop installation turn off the power ======================================== ATTENTION! UKM4 installation is ready to start. The HDD will be formatted. All files at the HDD will be erased. To start installation press any digit [0]-[9] or [Enter] key To stop installation turn off the power ============================================ confirm_offline_install() end ================================= = find-free-hdd.sh started = Thu Aug 31 10:02:22 UTC 2017 ================================= Changing current directory to /usr/local/bin Current directory is set to /usr/local/bin ==== LINUX_DRIVE check LINUX_DRIVE= LINUX_DRIVE parameter is set for autodetection detected_hdd_list: sda Checking if sda matches to sp_bdev=/dev/sda1 ... yes. Continuing check ERROR: Failed to detect LINUX_DRIVE Possibly hard disk support module is not loaded ERROR =============================== Thu Aug 31 10:02:22 UTC 2017 ==== UKM install log end ======