Подскажите, пожалуйста, как реанимировать MX7T
Зависает на загрузке.
Пробовал так, не помогает. Ничего не происходит.
Код:
How to recover MX7T Tecton stuck on boot screen?
May 11, 2017•HSM Article
Article Number
000025546
Last Modified Date
5/11/2017 2:38 PM
Question/Problem
How to recover MX7T Tecton which is stuck on boot up screen?
MX7 stuck in boot loop.
MX7L stuck on dark blue screen?
MX7T Tecton reports: "BL ERROR: Data Checksum Error".
Where I can find the OS of MX7T?
Applies To
MX7T (Tecton), MX7L (Tecton CS)
Windows CE 6
Resolution
To recover the MX7 Tecton which does not boot, use the procedure below to flash the unit from an SD card.
Prerequisites:
An SD card of 512MB or max 1GB that is FAT16 formatted.
An SD Card reader/writer, attached to a PC.
To recover the MX7 Tecton which does not boot up follow the steps below:
Obtain the latest image Tecton image "MX7TPx60.vvv.zip" where 'x' indicates the OS language, and 'vvv' indicates the version number
Unzip the downloaded zip file to a suitable empty folder on the PC.
That folder should now contains the files
bootimage_ce.nb0
eula.tag
eula.txt
HSM.CAB
Launch.exe
MX7T.ddf
MX7T.pkg
MX7Update.exe
SPLScreen.nb0
xip.bin
In this folder, create a file called 'reflash.tag'. That will be the trigger to update the bootloader and flash storage of the Tecton.
Copy the all these files to the root of the SD card.
Safely eject the SD Card from the card writer, and insert the SD card in the MX7T Tecton (under the rubber flap in the battery compartment).
Ensure the Tecton is powered or is equipped with a fully charged battery.
If not shutdown already, shut down the terminal by pressing the power key for 15 seconds.
Press the power key once more to turn the device on again.
The Tecton should now re-flash the bootloader and the flash storage with the files from the SD Card.