24.10.2024 12:52
Подскажите, пожалуйста, как сбросить MC32n0 до заводских настроек?
Возможен ли сброс без перезаливки ОС?
24.10.2024 12:54
Лучше сразу и обозначить, что привело к идее рискнуть окирпичить оборудование.
24.10.2024 13:07
Неоднократно перезаливали файлы в раздел "Application". Подкидывая файлы с SD-карты.
Новый конфиг работает не корректно. На другом ТСД этот же конфиг работает исправно.
Идея сбросить по дефолту напросилась сама собой)) Но перезаливать прошивку и создавать кирпич на палочке не хотелось бы)
В мануале увидел только варианты с перезаливом ОС.
Кстати, забыл уточнить, что устройство под управлением CE 7.0
24.10.2024 13:18
Не хотите шить всё, залейте только CleanAppl.hex через кредл в IPL режиме. В Вашем случае может прокатить.
24.10.2024 13:57
Если нет кредла и кабеля для подключения по юсб, а только аккумулятор, то вариантов вообще не остается?)
24.10.2024 14:20
цитата с сайта zebra.com:
cleanboot package там доступен
Steps to Factory Reset MC32N0 Running CE 7.0
Article ID:000012963 • September 21, 2024

This article explains methods to Clean Boot the Windows CE 7.0 MC32 using the clean boot package.
issue / question
What methods can I use to factory reset the MC32 running CE 7.0?
applicable to
MC32N0, MC3200
resolution / answer
MC32N0 with the CE 7.0 OS

Download the CE MC3200 Clean Boot Package For Windows CE from the MC3200 support page.

Possible files are (note new versions may be released):
32xxc70xxxDBA00001.zip contains MC32 CE 7.0 Clean boot and Blank files.
From the Temp folder on the MC32.
NOTE The battery must have at least a 30% charge or be connected to AC power for the update to begin.

Unzip the clean boot package zip file and extract the OSUpdate folder to your PC.
Connect the MC32N0 to your PC using the USB Cradle or USB Communication Cable.
On your PC, use ActiveSync to copy the entire OSUpdate folder to the root \TEMP folder on the MC32N0.
From the MC32N0, use Windows Explorer to navigate to the TEMP folder.
Open the OSUpdate folder.
Double-tap the 32N0c70Ben_TEMP shortcut file.
The update process will begin and a progress bar will be displayed while the update is progressing.
The MC32N0 will reboot when the process is complete, and the calibration screen will be displayed (pressing the Esc key cancels calibration).

Using an SD card
NOTE The battery must have at least a 30% charge or be connected to AC power for the update to begin.

Unzip the ZIP file and copy the OSUpdate folder to the root of the Storage Card folder.
Place the SD card in the device to be upgraded.
From the MC32N0, use Windows Explorer to navigate to the \Storage Card\OSUpdate folder.
Open the OSUpdate folder.
Double-tap the 32N0c70Ben_SD shortcut file.
The update process will begin, and a progress bar will be displayed while the update is progressing.
The MC32N0 will reboot when the process is complete, and the calibration screen will be displayed (pressing the Esc key cancels calibration).

Using the Bootloader
Using the Bootloader to download hex files to the MC32N0 from an SD card.
Unzip the clean boot package zip file and extract the OSUpdate folder to your PC.
Create a folder name MC32N0 on the root of the Micro SD card.
Copy the Cleanplat.hex and Cleanappl.hex files from the OSUpdate\Images folder to the MC32N0 folder on the SD Card.
Insert the SD card into the MC32N0.
Insert the MC32 into a Cradle with AC power.
To Boot the Bootloader menu on the MC32, simultaneously press and hold 1 + 9 + Power Key to reboot the MC32, it will power off.
Immediately release 1 + 9 + Power keys and then:
On the MC32N0 G Pistol grip devices, press and hold the pistol grip trigger.
On the MC32N0 non-pistol grip devices, press and hold the right scan button. When the Bootloader screen appears, release the trigger or the scan button.
Use the arrow keys to navigate to Download from SD card and press Enter.
PTo wipe the device configuration, use the arrow keys to navigate to Cleanplat.hex. Press Enter.
Press Enter when the message "Erasing Platform" "Operation complete" > "Hit Enter to Acknowledge" is displayed.
To reformat the Application drive, use the arrow keys to navigate to Cleanappl.hex. Press Enter.
Press Enter when the message " Erasing Application " "Operation complete" > "Hit Enter to Acknowledge" is displayed.
Navigate to All Done. Press Enter.
Navigate to Exit. Press Enter.
The MC32N0 will reboot, and the calibration screen will be displayed (pressing the Esc key cancels calibration).
Часовой пояс GMT +3, время: 10:43.

Форум на базе vBulletin®
Copyright © Jelsoft Enterprises Ltd.
В случае заимствования информации гипертекстовая индексируемая ссылка на Форум обязательна.